Marker
==========================================================

When doing left mouse click in moving window with activated measurement mode, a marker can be set.

By again doing a left mouse click in moving window, a second marker can be set.


.. attention::

      To remove markers press *<ESC>* to leave measurement mode.


Quick MES mode
----------------------------------------------------------

When two markers are set in moving window, at top bar of moving window the software shows some quick measurement values from between the markers of currently in measured-values window selected channel.

.. figure:: /Images/Analyzer/QuickMesMode.png 
   :scale: 20%
   :align: center

   Measured-values window with only activated channels

..

.. figure:: /Images/Analyzer/QuickMesMode_Detail.png 
   :scale: 60%
   :align: center

   Detailed screenshot of Quick MES mode of channel #V_GPS

- **dt**: Time between set markers
- **ds**: Distance between set markers
- **d**: Difference between channel value from second to first marker of selected channel 
- **avg**: Average value of selected channel between set markers
- **min** & **max**: Minimum and maximum value of selected channel between set markers
- **d/dt**: Derivative of selected channel between set markers

.. attention::

      Quick MES mode is only possible for channel in moving window and not for channels in areas!


User defined marker
----------------------------------------------------------

User defiend markers are used to mark points in respective measurement for having a look later or showing to collegues or team mates.

.. important::
      At User defined marker always a comment must be added.



.. important::
      Also when copying measurement the User defined marker will still be available.

.. figure:: /Images/Analyzer/UDM_Set.png 
   :scale: 40%
   :align: center

   Add user defined marker at current cursor position

..

.. figure:: /Images/Analyzer/UDM.png 
   :scale: 40%
   :align: center

   User defined marker in MES